About Irrigation Calc
Irrigation Calc is a free library of irrigation calculators for homeowners, landscapers, contractors and growers. Every calculator shows its formula, its sources, what it assumes and when it was last checked, so you can see exactly where a number comes from.
Make irrigation math something anyone can check, so less water, money and time is wasted on guesswork.
Our mission
- 32free calculators in 6 topics
- 706worked cases tested before every update
- 100linked sources cited across the calculators
- 23universities, agencies and research bodies relied on
What we stand for
Show the working
Every result comes with its formula and a worked example you can follow by hand.
Cite the source
Every method links to the extension bulletin, handbook or paper it comes from.
Say what it can’t do
Every page lists its assumptions and limits, and says when to call a professional.
Stay independent
No products to sell, no affiliate links and no paid placements, ever.
Why we built Irrigation Calc
Most watering problems are arithmetic problems in disguise. A controller set to the same minutes for spray heads and rotors. A zone with more heads than the water line can feed. A pipe one size too small for its run. A schedule that never changes from April to August. Each one wastes water, money or plants, and each one can be fixed with a few numbers worked out properly.
The methods to work them out already exist. They sit in university extension bulletins, government engineering handbooks and technical papers, but they are scattered, written for specialists and often in only one set of units. Many online calculators go the other way: they hand you a number with no formula, no source and no way to tell whether it is right.
We built Irrigation Calc to sit in the middle. Every calculator uses a published method, explains it in plain English, shows the arithmetic with a worked example and links to the source, so you can check the answer and learn the method at the same time. We aren’t a manufacturer, a retailer or an installer, and we have no products to sell you. That leaves us free to say whatever the numbers say: fewer heads, a smaller pump, or simply watering less.
What we cover
All 32 calculators →- Water Needs CalculatorsHow much water plants need, run times, schedules, soil and rain.6 calculators →
- Sprinkler CalculatorsPrecipitation rate, uniformity, spacing, nozzles, zones and wire.6 calculators →
- Drip Irrigation CalculatorsDrip zones, tubing length, emitter flow and emitter spacing.4 calculators →
- Irrigation Hydraulics CalculatorsFriction loss, pipe size, pressure, pumps and available flow.5 calculators →
- Irrigation Water Cost CalculatorsWater use, bills, landscape budgets, pumping and system cost.5 calculators →
- Farm Irrigation CalculatorsSystem capacity, pivots, furrows, fertigation, weirs and units.6 calculators →
Who we are
Irrigation Calc is run by a small, independent team that builds web tools and writes about the methods behind them. We publish under one name, the Irrigation Calc Team, because every page is built and reviewed by more than one person, and we take responsibility for every page together.
We don’t claim credentials we don’t have. Instead of asking you to take our word for it, we show the formula, the source and the limits on every page, so the methods can speak for themselves. Here is how the work is shared out.
Methods and research
Reads each source in full, writes the calculator brief with its formula, limits and worked examples, and rechecks sources and links on a schedule.
Engineering and testing
Builds each calculator in exact base units, writes its test cases, and checks accessibility, speed and every screen size.
Editing and review
Turns methods into plain English, checks every number on the page against its source, and gives each page a second review before it goes live.
Corrections and reader mail
Answers messages, checks reported errors against the sources, and logs every fix in the page history.
How a calculator gets made
- Start from a real questionSuch as “how many minutes should this zone run?”, and list the inputs people actually have on hand.
- Find and read the methodWe read the source in full and record the formula, its units, its limits and worked examples, most of them from the source itself.
- Code it and test itThe math must reproduce every worked example in US and metric units before it can go live, and again before every later change.
- Explain it plainlyFormula, worked examples, what the result means, common mistakes, assumptions and linked sources, in plain English.
- Review, publish and keep it currentA second review checks every number against the sources. After launch we recheck sources, date every change and log every correction.
The full process is in our editorial policy.
The references we rely on
These are the organizations whose published methods the calculators use, with the number of calculators that cite each one. The list is counted from the calculator pages every time the site is built.
Government and international
- B.C. Ministry of Agriculture5
- FAO (United Nations)5
- USDA NRCS4
- California Department of Water Resources3
- U.S. Bureau of Reclamation2
- U.S. EPA WaterSense2
- Spanish Ministry of Agriculture (SIAR)1
University extension
- Kansas State University12
- University of Florida IFAS8
- University of California7
- Texas A&M AgriLife6
- University of Nebraska–Lincoln5
- Oklahoma State University3
- LibreTexts (open textbook)2
- South Dakota State University2
- Utah State University2
- NC State University1
- UMass Amherst1
- University of Tennessee1
- Washington State University1
Standards and research
- Irrigation Association5
- NCAT ATTRA2
- ASABE1
15 calculators also use manufacturers’ published engineering data, such as nozzle charts and friction tables. It is cited for the data only; we have no business ties to any manufacturer.
How the site is funded
Irrigation Calc is free to use and is funded by the team that builds it. The site shows no ads today. We may add ads served by Google in the future to cover running costs; if we do, advertisers will have no say in what we publish, an ad will never change a result, and we will update this page and our privacy policy first. We don’t accept payment for links or placements, we don’t use affiliate links, and the manufacturers we cite have no part in our work. Where a calculator uses example prices, they are dated retail prices listed on the page, and you can replace them with your own.
Private by design
The calculators do their math in your browser. There are no accounts, and we never ask who or where you are. Your inputs are kept only in the page address, so you can bookmark or share a result. Our privacy policy explains the rest.
Our policies
- Editorial policyHow we choose sources, test, update and correct.Read →
- CorrectionsReport a number that looks wrong; every fix is logged.Read →
- DisclaimerWhat the results are, and when to call a professional.Read →
- Privacy policyWhat is collected when you visit, and your choices.Read →
- AccessibilityKeyboard, screen reader and low-vision support.Read →
- Terms of serviceThe rules for using the site and its results.Read →
Questions about us
Who writes Irrigation Calc?
An independent team that publishes under the Irrigation Calc Team byline. Every calculator and page is built and reviewed by more than one person, and the team takes responsibility for every page together.
Is Irrigation Calc free?
Yes. Every calculator is free to use, with no account or sign-up, and the site shows no ads today. If we add ads later to cover running costs, they will never change a result or influence what we publish.
How do you make sure a calculator is right?
Each one follows a published method and must reproduce a set of worked examples, many taken from its sources, in US and metric units before it goes live and before every later change.
Do you sell irrigation products or install systems?
No. We aren’t a manufacturer, retailer or installer, and we don’t use affiliate links, so nothing pushes us toward one product or answer.
Can I suggest a calculator or report an error?
Please do, through the contact page. Every report is checked against the sources, and fixes are recorded in the calculator’s page history.
Spotted something? Tell us.
A number that looks wrong, a calculator you need, or a question about how we work: every message is read, and every correction is checked against the sources and logged.
Site history
- Irrigation Calc launches with calculators for water needs, sprinklers, drip, hydraulics, water costs and farm irrigation.
- Editorial policy, accessibility statement, disclaimer and contact form published; this About page updated.