Irrigation Water Requirement Calculator
Find how much water your lawn, a tree or a crop needs each day and each week, as a depth and in gallons. Enter your local ETo (or pick a typical value), choose the plant, and see the net need plus the gross amount to apply after system losses.
Water requirement calculator
How the calculator works
A plant’s daily water need is the reference ET for the day multiplied by a coefficient for the plant. Multiply that depth by the area and you have gallons.
Reference ET (ETo) is how much water a well-watered grass field loses to the weather. A lawn, a shade tree and a tomato each use a different share of it. That share is the turf coefficient, the plant factor or the crop coefficient (Kc), depending on what you grow. The calculator shows each value and lets you change it.
- Daily need, depthd = ETo × K (K = Kc for lawns and crops, plant factor for trees and shrubs)
- Canopy areaA = π × D² ÷ 4, where D is the canopy diameter
- Gallons per dayG = d × A × 0.623 (inches and square feet) · liters = mm × m²
- Per week and monthweekly = daily × 7 · monthly = daily × 30
- Gross to applygross = net ÷ efficiency
- Fieldsacre-inches per week = d × 7 × acres; gallons = acre-inches × 27,154
Don’t know your ETo? Pick a typical summer value for your climate from the first list, or work it out from your weather with the evapotranspiration calculator. A local ET network value is better than either when you have one.
Worked examples
A cool-season lawn
- InputsETo 0.25 in/day, cool-season grass (Kc 0.80), 2,000 sq ft, sprinkler efficiency 70 %.
- Depth0.25 × 0.80 = 0.20 in a day, or 1.40 in a week.
- Gallons0.20 × 2,000 × 0.623 = 249 gal a day; 1,744 gal a week.
- Gross1,744 ÷ 0.70 = 2,492 gal a week to apply before any rain.
A shade tree on drip
- InputsCanopy 10 ft across, high water use (plant factor 0.80), ETo 0.25 in/day, drip at 90 %.
- Areaπ × 10² ÷ 4 = 78.5 sq ft.
- Gallons0.623 × 78.5 × 0.80 × 0.25 ÷ 0.90 = 10.9 gal a day, or 76.1 gal a week. This matches the Utah State University Extension worked example.
Corn at peak
- Inputs40 acres of field corn at mid-season (Kc 1.20), ETo 0.32 in/day, efficiency 85 %.
- ETc0.32 × 1.20 = 0.384 in a day, or 2.69 in a week.
- Volume2.688 × 40 = 107.52 acre-inches a week net; ÷ 0.85 = 126.49 acre-inches gross, or about 3.43 million gallons.
How much water a lawn needs per week
At typical summer ETo, a cool-season lawn needs about 1.1 to 1.7 in a week and a warm-season lawn about 0.8 to 1.3 in. Less in spring and fall.
| ETo per day | Cool-season, in/week | gal per 1,000 sq ft | Warm-season, in/week | gal per 1,000 sq ft |
|---|---|---|---|---|
| 0.15 in (3.8 mm) | 0.84 | 523 | 0.63 | 392 |
| 0.20 in (5.1 mm) | 1.12 | 698 | 0.84 | 523 |
| 0.25 in (6.4 mm) | 1.40 | 872 | 1.05 | 654 |
| 0.30 in (7.6 mm) | 1.68 | 1,047 | 1.26 | 785 |
Cool-season grasses (Kentucky bluegrass, tall fescue, perennial ryegrass) keep a good look at about 80 % of ETo. Warm-season grasses (Bermuda, zoysia, St. Augustine, buffalograss) do it at about 60 %. FAO-56 lists higher coefficients for turf grown for maximum growth; landscape lawns don’t need that. If you want a greener or a leaner lawn, choose Custom and type your own coefficient.
The weekly need is not how much to put down at once. Split it into waterings your soil can hold with the irrigation schedule calculator, then set the minutes with the irrigation run time calculator.
How much water a tree needs: the canopy method
A tree’s water use scales with the ground its canopy shades. Measure across the canopy, work out the area, and multiply by ETo and the plant factor.
| Canopy diameter | Canopy area | gal per day | gal per week |
|---|---|---|---|
| 5 ft | 19.6 sq ft | 1.7 | 11.9 |
| 10 ft | 78.5 sq ft | 6.8 | 47.6 |
| 15 ft | 176.7 sq ft | 15.3 | 107.0 |
| 20 ft | 314.2 sq ft | 27.2 | 190.3 |
| 30 ft | 706.9 sq ft | 61.2 | 428.1 |
Plant factors follow UC landscape guidance: very low 0.10, low 0.20, moderate 0.50 and high 0.80. Most established trees and shrubs do well at 0.50. Apply the water over the drip line, where the feeder roots are, not at the trunk.
For a newly planted tree, the root ball is the only part that can take up water, so use the Area entry with the root ball or wetted area if it is wider than the canopy. For shrubs on a grid, use spacing × spacing as the area per plant. To turn the gallons into emitters and minutes, use the drip irrigation calculator and the run time calculator.
Crop coefficients by growth stage
Crop coefficients start low while the crop is small, peak when the canopy is full, and fall as it ripens. The calculator fills in the value for the crop and stage you pick.
| Crop | Initial | Mid-season | Late season |
|---|---|---|---|
| Tomato | 0.60 | 1.15 | 0.80 |
| Field corn (grain) | 0.30 | 1.20 | 0.60 |
| Sweet corn | 0.30 | 1.15 | 1.05 |
| Potato | 0.50 | 1.15 | 0.75 |
| Lettuce | 0.70 | 1.00 | 0.95 |
| Green beans | 0.50 | 1.05 | 0.90 |
| Peppers | 0.60 | 1.05 | 0.90 |
| Cucumber | 0.60 | 1.00 | 0.75 |
| Squash and pumpkin | 0.50 | 1.00 | 0.80 |
| Onion (dry) | 0.70 | 1.05 | 0.75 |
| Alfalfa (averaged cuttings) | 0.40 | 0.95 | 0.90 |
| Spring wheat | 0.30 | 1.15 | 0.25 |
| Cotton | 0.35 | 1.15 | 0.60 |
In drier, windier places the mid and late values run a little higher, and in humid, calm places a little lower; FAO-56 gives the adjustment. Few crops go above 1.25 under standard conditions, so the calculator warns you if you type a value that high. A Kc above 1.0 at mid-season is the stage to size a farm system for.
Net vs gross: allowing for system losses
The net requirement is what the plants use. No system delivers every drop to the roots: wind blows spray away, some evaporates, some runs off, and coverage is never perfectly even. Gross = net ÷ efficiency.
| System | Typical efficiency | Apply this × net |
|---|---|---|
| Drip | 85–95 % | 1.05–1.18 |
| Sprinklers, rotors | 70–80 % | 1.25–1.43 |
| Furrow or flood | 50–70 % | 1.43–2.00 |
For sprinkler zones, the run time calculator adds its own allowance for uneven coverage. If you use it, take the net depth from here to avoid counting losses twice.
Gallons per inch of water
One inch of water over one square foot is 0.623 gallons (7.48 gallons per cubic foot ÷ 12). Every gallon figure on this page comes from that number.
| Area | 1 inch of water | 1 mm of water |
|---|---|---|
| 1 sq ft | 0.623 gal | 0.093 L |
| 100 sq ft | 62.3 gal | 9.3 L |
| 1,000 sq ft | 623 gal | 93 L |
| 1 acre | 27,154 gal | 4,047 L |
| 1 m² | 6.7 gal | 1 L |
How to read your result
| Result | What it means | What to do |
|---|---|---|
| Lawn under 0.75 in a week | A low-demand period: spring, fall or a mild climate. | Water less often, not less deeply. |
| Lawn 0.75–1.5 in a week | Typical summer need. | Split it into the waterings your soil can hold. |
| Lawn over 1.5 in a week | High demand. | Use 2–3 waterings and check for runoff with the cycle split. |
| Tree gallons | Water used per tree per day, after losses. | Apply it over the drip line area. |
| Crop Kc over 1.0 | The crop uses more than the grass reference. | Plan peak capacity on this stage. |
Every result is before rain. Credit the rain that soaks in with the effective rainfall calculator, then water the rest.
Tips and common mistakes
Match ETo to the period
A July ETo gives a July need. Re-run it each month, or use the week’s ETo total for this week’s watering.
Don’t count losses twice
If your run time already allows for uneven coverage, start it from the net need, not the gross.
Measure the canopy, not the trunk
Average two widths across the canopy at right angles. Trunk size doesn’t tell you water use.
Group plants by water use
A zone with lawn and shrubs can’t water both right. Put plants with similar factors on the same valve.
How we build and check this calculator
Every coefficient on this page is shown, sourced and editable, and the code is tested against worked cases before every update.
- Methods from recognised sources. Crop coefficients come from FAO-56 Table 12, checked line by line. Turf and plant factors follow University of California landscape guidance. The tree formula follows Utah State University Extension. See the sources.
- Tested against worked cases. Eight test cases run against the calculator code before every update, including the Utah State tree example (10.9 gal a day), a cool-season and a warm-season lawn, a tomato bed, a 40-acre corn field and a metric lawn. All must match.
- Honest about limits. Coefficients are averages for healthy plants in typical conditions. Newly planted, stressed, shaded or crowded plants use different amounts; very large trees in irrigated lawns share water with the turf.
- Your entries stay on your device. The calculator runs in your browser. Nothing you type is sent anywhere; your inputs live only in the page address, so you can bookmark or share a result.
- Corrections are welcome. If a number looks wrong, tell us. We check it against the sources, fix the page and update the date at the top.
Page history
- Published. Coefficients, test cases and source links checked.
Questions
How much water does a lawn need per week?
In summer most lawns need about 1 to 1.5 in a week, rain included. The exact figure is ETo × the turf coefficient × 7. At an ETo of 0.25 in/day, cool-season grass needs 1.40 in a week and warm-season grass 1.05 in. In spring and fall the need often drops below 0.75 in.
How many gallons of water does a tree need per day?
Multiply 0.623 by the canopy area in square feet, the plant factor and the daily ETo, then divide by the system efficiency. A tree with a 10 ft canopy and a plant factor of 0.5 needs about 6.8 gal a day at 0.25 in/day ETo on drip; the same size high-water-use tree (0.8) needs about 10.9 gal.
Do warm-season grasses need less water than cool-season grasses?
Yes. Bermuda, zoysia and St. Augustine use about 0.6 of ETo for good landscape quality, against about 0.8 for bluegrass, fescue and ryegrass. At the same weather a warm-season lawn needs about a quarter less water.
What is a crop coefficient (Kc)?
Kc is the ratio of a crop’s water use to the grass reference (ETo). It starts low when the crop is small, peaks at mid-season when the canopy is full, often above 1.0, then falls as the crop matures. Tomatoes run 0.60 early, 1.15 at mid-season and 0.80 late.
What is the difference between net and gross irrigation requirement?
Net is what the plants use. Gross is what you must apply, because some water is lost to wind, evaporation, runoff and uneven coverage. Gross = net ÷ efficiency, so at 70 % efficiency you apply about 1.43 times the net.
How many gallons is an inch of water?
One inch of water over 1 sq ft is 0.623 gal, so it is 623 gal over 1,000 sq ft and 27,154 gal over an acre. In metric, 1 mm over 1 m² is 1 liter.
Should I subtract rain from the result?
Yes, but only the rain that reaches the roots. Very light showers mostly evaporate and heavy storms run off. Use the effective rainfall calculator, then water the difference.
Sources
- Food and Agriculture Organization of the United Nations (FAO), Crop Evapotranspiration, Irrigation and Drainage Paper 56, Chapter 6: ETc, single crop coefficient (Table 12). ETc = Kc × ETo and the initial, mid-season and late-season crop coefficients used in the crop list, checked line by line.
- University of California Center for Landscape and Urban Horticulture, Estimating Tree Water Requirements. Turf plant factors 0.8 (cool-season) and 0.6 (warm-season), 0.5 for trees and shrubs, and the canopy area method.
- University of California Cooperative Extension, Making Sense of ET Adjustment Factors for Budgeting and Managing Landscape Irrigation (D. Pittenger). How plant factors and crop coefficients adjust ETo for landscapes, and their limits.
- Utah State University Extension, Drip Irrigation for Trees. Gallons per plant = 0.623 × plant area × plant factor × ET ÷ efficiency, with the worked example of 10.9 gal a day that our tree test reproduces.
- Texas A&M AgriLife Extension, Watering Your Vegetables (EHT-024). Vegetable water need from ETo and crop coefficients, and 27,154 gallons per acre-inch.
- California Department of Water Resources, California Irrigation Management Information System (CIMIS). An example of a public ET network that publishes daily ETo to use here.
- The 0.623 gal per square foot per inch and 27,154 gal per acre-inch constants, and the metric conversions, are derived on this page.
Links checked November 15, 2026. Sources differ on turf coefficients (FAO-56 lists higher values for well-watered turf grown for full growth; Utah State uses 0.5 for warm-season grass). This page uses the UC landscape values and lets you edit them.