Irrigation Water Cost Calculators

Put a number on watering. See how many gallons your system uses, what that water adds to the bill on flat or tiered rates, whether a landscape meets its water budget, what a farm pump costs to run, and what a new sprinkler system costs to install.

Which calculator do you need?

All Water Costs calculators

From gallons to dollars

Every cost on this page starts with a volume of water. Get the gallons right first, then price them.

  1. Measure the waterAdd up zone run times, an area and depth, or two meter readings with the water use calculator.
  2. Price itApply your flat or tiered rate, with or without sewer, using the water cost calculator.
  3. Check the budgetFor California and other MWELO-based codes, compare MAWA and ETWU with the landscape water budget calculator.
  4. Price the energyFor wells and farm pumps, find the cost per acre-inch and per season with the pumping cost calculator.
  5. Price the hardwareEstimate parts and labour, DIY or professional, with the sprinkler system cost calculator.
  • Area and depthgallons = sq ft × inches × 0.6234 ÷ efficiency
  • Tiered irrigation costbill (indoor + irrigation) − bill (indoor only)
  • Water budgetMAWA = ETo × 0.62 × [ETAF × LA + (1 − ETAF) × SLA]
  • Pumping workwater hp-hours per acre-inch = 0.11428 × total dynamic head (ft)

Billing units and conversions

Common water units on US bills and in irrigation.
UnitUS gallonsWhere you see it
1,000 gallons (kgal)1,000Many city water bills
CCF or HCF (100 ft³)748Many city water bills
Cubic metre264.17Metric bills
Inch on 1,000 sq ft623Lawn watering
Acre-inch27,154Farm irrigation

Convert any farm volume or flow with the acre-inch converter. To find the depth your plants need before pricing it, start with the water requirement calculator.

Where the savings are

Water only what the plants use: weather-based run times from the run time calculator stop overwatering in spring and fall. Fix coverage before adding minutes, since a poor distribution uniformity forces longer runs for the whole zone. Move beds and shrubs to drip. On farms, pumping cost rises in step with total head, so lowering pivot pressure or fixing a pumping plant that tests below the Nebraska criteria cuts every acre-inch.

Mistakes to avoid

Using the bill’s average price

On tiered rates the extra irrigation water costs more than the average. Price only the extra.

Forgetting sewer

Some utilities charge sewer on all metered water, which can triple the cost of irrigation.

Mixing CCF and gallons

A CCF is 748 gallons, not 100. Check the unit printed on the bill or meter.

Hidden leaks

If the meter moves with every tap off, fix the leak before pricing your irrigation.

How we build and check these calculators

  • Methods from recognised sources. EPA WaterSense, California DWR and Kansas State University methods, named on every calculator page.
  • No hidden prices. Rates and energy prices are yours to enter; the system cost calculator shows the date and source of every default price.
  • Open about method and limits. Read our editorial policy, or tell us if a number looks wrong.

Questions

How much water does a sprinkler system use?

Zone flow in GPM times the minutes it runs. Six spray heads at 1.5 GPM running 15 minutes use 135 gallons each time. One inch on a 5,000 sq ft lawn is about 3,117 gallons before losses.

How much does it cost to water a lawn?

Gallons used, divided by your billing unit, times your rate. One inch on 5,000 sq ft costs about $43.61 at $4 water plus $10 sewer per 1,000 gallons, but $12.46 if sewer isn’t charged on it.

Why does irrigation cost more than my average water price?

On tiered rates, indoor use fills the cheap first tier, so irrigation water lands in the higher tiers. The water cost calculator prices only the extra water.

What is a CCF on my water bill?

One hundred cubic feet of water, which is 748 gallons. Many US utilities bill in CCF, also written HCF.

Do the cost calculators use real prices?

Water rates, energy prices and labour rates are yours to enter, because they vary so much by place. The system cost calculator starts from a dated list of retail prices you can change.

Is a smart controller worth it?

EPA says replacing a clock timer with a WaterSense labeled controller can save an average home up to 15,000 gallons a year. Enter your own expected saving and price to see the payback.

Sources

  1. U.S. Environmental Protection Agency, WaterSense, Irrigation Controllers. Water savings from WaterSense labeled irrigation controllers.
  2. California Department of Water Resources, Model Water Efficient Landscape Ordinance. MAWA and ETWU equations used in the landscape water budget.
  3. Kansas State University Research and Extension, Comparing Irrigation Energy Costs (MF-2360). Nebraska pumping plant criteria and energy cost per acre-inch.
  4. Kansas State University Research and Extension, Irrigation Formulas and Conversions (MF-2404). Gallons per acre-inch and water volume conversions.

Links checked November 16, 2026. Each calculator page lists its own full set of sources, including the dated price list behind the system cost calculator.