Free irrigation calculators

Irrigation Calculators That Show Their Working

Work out sprinkler run times, drip zones, pipe sizes, pump power, water bills and center pivot settings. Every calculator shows the formula, a worked example, its sources and the date it was last checked, so you can trust the number before you set the controller.

32 calculators. Start typing to filter, or pick a common one below.

  • Free, no sign-up
  • Runs in your browser
  • Formula and sources on every page
A soil profile: a sprinkler sprays the lawn, water soaks down through the soil horizons to the roots, and a drip emitter wets a bulb of soil beside a shrub. spray wetting front drip bulb root zone · the water bank

Most used calculators

All 32 calculators →

Browse by topic

Why you can trust these numbers

A calculator that only gives an answer asks you to take it on faith. Ours show their working, so you never have to.

  • Methods from the people who wrote the book. University extension services, the FAO, the USDA NRCS, the U.S. Bureau of Reclamation and the Irrigation Association. Every page links to its sources.
  • Tested before every change. Each calculator reproduces worked examples, many taken straight from its sources, in US and metric units. If one case fails, the change doesn’t go live.
  • Honest about limits. Every result lists its assumptions and says what the number means, with typical ranges and what to do next.
  • Independent. We don’t sell products, take affiliate commissions or accept paid placements.

Read our editorial policy · About the team

See the working, on every page

Here is the kind of worked example every calculator shows, taken from the irrigation run time calculator with its default inputs.

Try the run time calculator

  1. Water to put down0.5 in per watering (net)
  2. Zone rate1.5 in/hr for spray heads
  3. Coverage adjustmentDU 65 % → multiplier 1 ÷ (0.4 + 0.6 × 0.65) = 1.27
  4. Run time0.5 ÷ 1.5 × 60 × 1.27 = 25.3 → 26 minutes
  5. On loam (intake 0.4 in/hr) the calculator then splits those minutes into cycles with soak time between them, so the water soaks in instead of running off.

How to get a good answer

  1. Measure what you canA five-gallon bucket test gives your supply’s flow, a few catch cups give a zone’s real rate, and two meter readings give real use. A measured number beats a typical value every time.
  2. Pick the calculator for the questionUse the search above, or start from a topic. Each calculator links to the ones before and after it in the job.
  3. Read what the result meansUnder every answer you’ll find whether it is in a normal range, what it assumes and what to do next.
  4. Check again when things changePlants use far more water in midsummer than in spring. Revisit run times as the seasons turn.

Built for everyone who waters

Where to start, by who you are.
You areStart with
A homeowner with a lawn or gardenRun time, watering schedule, water cost
A landscaper or irrigation contractorZones, pressure, system cost
A grower or farm managerSystem capacity, center pivot, pumping cost
A student or water managerET, water budget, unit conversions

Questions

What is an irrigation calculator?

A tool that turns measurements you have, such as flow, area, soil type or weather, into the answer you need, such as minutes per zone, pipe size or gallons per week. Ours use published methods and show the math, so you can check each step.

Which calculator sets my sprinkler timer?

The irrigation run time calculator. If you don’t know how much water to apply, find it first with the water requirement calculator, and measure your zone’s rate with the precipitation rate calculator.

Do I need an account, or do you need my location?

No. There are no accounts or sign-ups, and the calculators never ask where you are. The math runs in your browser, and your inputs are kept only in the page address so you can bookmark or share a result.

Are the results good enough for real projects?

They are solid planning estimates built on extension and engineering methods and tested against worked examples. Always check against your product charts, local code and water supplier rules, and use a licensed professional where the law requires one. Our disclaimer explains the limits.

How often are the calculators checked?

Every calculator runs its full set of test cases before any change goes live, and sources and links are rechecked on a schedule. Each page shows its last-updated date and a page history.

Who runs Irrigation Calc?

An independent team that builds and checks every calculator and publishes under the Irrigation Calc Team byline. We don’t sell irrigation products or install systems. Read more about us.