Sprinkler Spacing Calculator
Find how far apart to set sprinkler heads from their throw radius, in a square or triangle, with a wind adjustment. Then count the heads a lawn needs and see how many quarter-, half- and full-circle heads to buy, with the actual spacing after fitting the grid.
Sprinkler spacing calculator
How the calculator works
The spacing tab turns a head’s throw radius into the distance between heads and between rows. The head-count tab lays a grid over your lawn and counts the heads, sorted by the arc each one needs.
- DiameterD = 2 × throw radius R
- Head spacingS = f × D, where f = 0.50 head-to-head, or the wind percentage
- Row spacingsquare L = S · triangle L = 0.866 × S
- Rectangle gridcolumns c = ⌈length ÷ S⌉ + 1 · rows r = ⌈width ÷ L⌉ + 1 · heads = c × r
- Arcs (square grid)quarter = 4 · half = 2(c − 2) + 2(r − 2) · full = the rest
- Actual spacinglength ÷ (c − 1) and width ÷ (r − 1)
- Irregular lawnheads ≈ ⌈area ÷ (S × L) + perimeter ÷ (2 × S) + 1⌉
- Densityheads per acre = 43,560 ÷ (S × L) · per hectare = 10,000 ÷ (S × L) in metres
Every count rounds up, so the actual spacing is the same or a little closer than the target. The tool stops at layout; for how fast the heads water, use the precipitation rate calculator, and for how many fit on one valve, the sprinkler zone calculator.
Worked examples
A 60 × 30 ft lawn with 15 ft sprays
- Grid⌈60 ÷ 15⌉ + 1 = 5 columns; ⌈30 ÷ 15⌉ + 1 = 3 rows.
- Heads5 × 3 = 15 heads: 4 quarter, 8 half and 3 full circles.
- CheckActual spacing 60 ÷ 4 = 15 ft and 30 ÷ 2 = 15 ft; 43,560 ÷ 225 = 194 heads per acre.
A rotor in a breeze, triangular
- InputsRotor with a 35 ft radius, 4–7 mph wind, triangle.
- Spacing55 % × 70 ft = 38.5 ft between heads.
- Rows0.866 × 38.5 = 33.3 ft between rows. In a square the same wind gives 50 % × 70 = 35 ft both ways.
An odd-shaped yard
- Inputs2,400 sq ft with a 220 ft edge, 15 ft spacing.
- Estimate2,400 ÷ 225 + 220 ÷ 30 + 1 = 10.67 + 7.33 + 1 = 19.
- ResultAbout 19 heads. Sketch the outline and place corners and edges first.
Sprinkler spacing by head type
| Head | Typical radius | Head-to-head spacing | Heads per 1,000 sq ft (square) |
|---|---|---|---|
| Spray, 8 ft nozzle | 8 ft (2.4 m) | 8 ft | 15.6 |
| Spray, 12 ft nozzle | 12 ft (3.7 m) | 12 ft | 6.9 |
| Spray, 15 ft nozzle | 15 ft (4.6 m) | 15 ft | 4.4 |
| Rotary nozzle | 18–24 ft (5.5–7.3 m) | 18–24 ft | 1.7–3.1 |
| Rotor | 30–40 ft (9.1–12.2 m) | 30–40 ft | 0.6–1.1 |
| Impact | 45 ft (13.7 m) | 45 ft | 0.5 |
The radius falls if pressure at the head is low, and so does the spacing you can use.
Spacing for wind
| Wind | Square | Triangle | 15 ft radius, square |
|---|---|---|---|
| 0–3 mph (0–5 km/h) | 55 % | 60 % | 16.5 ft |
| 4–7 mph (6–11 km/h) | 50 % | 55 % | 15.0 ft |
| 8–12 mph (13–19 km/h) | 45 % | 50 % | 13.5 ft |
These are upper limits; head-to-head (50 %) is the safe default for home lawns. Design for the windiest time you water, not for calm air. Large turf and farm layouts often use the percentage directly; pick “My own percentage” for anything from 30 to 65 %.
Square or triangular spacing?
In a triangle, each row is shifted half a space and the rows sit 0.866 × S apart. Heads cover the ground more evenly and can go a little wider, so a large open area needs fewer heads. In a square, heads line up with straight edges and corners, so part-circle heads are easy to place. Most residential lawns use squares; parks, sports fields and farms often use triangles.
The head count for a triangle is approximate, because the staggered rows change the edge heads; the tab gives the grid and spacing but not an arc breakdown.
Mistakes to avoid
Spacing by diameter
A 15 ft head throws a 30 ft circle, but it goes 15 ft from the next head, not 30. Spacing at the full diameter leaves dry rings.
Counting by circle area
Dividing the lawn area by one circle’s area leaves out the overlap and the edge heads. Use the grid count.
Catalogue radius at the wrong pressure
Read the radius in the chart row for the pressure at your heads, not the highest one listed.
Forgetting the edges
Every edge and corner needs its own part-circle head, pointing in. Don’t rely on heads in the middle to reach them.
How we build and check this calculator
Every rule on this page names its source, and the code is tested against worked cases before every update.
- Methods from recognised sources. Spacing patterns and the 0.866 factor follow Rain Bird technical data; wind percentages follow Toro’s spacing guidelines. See the sources.
- Tested against worked cases. Seven cases run against the calculator code before every update: a 15 ft spray, a rotor in wind in both patterns, a 60 × 30 lawn, an 80 × 45 triangle, an irregular yard, a metric head and a lawn smaller than one spacing. All must match.
- Honest about limits. Trees, beds, slopes and odd corners change a real layout. Treat the count as a starting point and draw the plan.
- Your entries stay on your device. The calculator runs in your browser. Nothing you type is sent anywhere; your inputs live only in the page address, so you can bookmark or share a result.
- Corrections are welcome. If a number looks wrong, tell us. We check it against the sources, fix the page and update the date at the top.
Page history
- Published. Methods, test cases and source links checked.
Questions
How far apart should sprinkler heads be?
Space them head-to-head, so each head throws water to the next one. That means the spacing equals the throw radius. A head with a 15 ft radius goes 15 ft from its neighbours. In wind, space them closer.
What does head-to-head coverage mean?
Each sprinkler’s spray reaches the heads next to it. Every spot then gets water from two or more heads, which evens out the light watering at the edge of each spray. It is the standard for lawns.
Is triangular or square spacing better?
Triangular spacing gives more even coverage and allows heads a little farther apart, so you need fewer. Square spacing fits straight edges and corners more easily, which is why most home lawns use it.
How does wind change sprinkler spacing?
Wind pushes the spray downwind and shortens it upwind, so heads need to be closer. Manufacturer guidelines drop square spacing from 55 % of the throw diameter in calm air to 50 % at about 4–7 mph and 45 % at 8–12 mph.
How many sprinkler heads do I need for my lawn?
For a rectangle, divide the length and width by the spacing, round each up and add one, then multiply. A 60 × 30 ft lawn at 15 ft needs 5 × 3 = 15 heads. The head-count tab also tells you how many are quarter, half and full circles.
Can I space sprinklers farther apart to save money?
You can, but the gaps between heads go dry and you end up running every zone longer to green them up. The water cost usually outweighs the few heads saved.
Should I mix sprays and rotors to cover a lawn?
Not on the same zone. Sprays put down water several times faster than rotors, so one part floods while the other stays dry. Put each type on its own zone with the sprinkler zone calculator.
Sources
- Rain Bird Corporation, Irrigation Design Tip: Sprinkler Spacing Patterns. Square and triangular patterns, the triangular row height and head-to-head coverage.
- Rain Bird Corporation, Technical Newsletter, Spring 2001: Sprinkler Spacing. Spacing as a share of diameter, matched precipitation and keeping sprinkler types on separate zones.
- The Toro Company, FLX34 Series sprinkler specification sheet. Spacing guidelines by wind, square 55 / 50 / 45 % and triangular 60 / 55 / 50 % of diameter at no wind, 4 mph and 8 mph.
- Rain Bird Corporation, Precipitation rate equations (catalogue technical data). Row spacing = 0.866 × head spacing for a triangular pattern.
- Irrigation Association, Spacing and Pattern Effects on DULQ of Spray Heads (2006). Measured effect of spacing and pattern on the uniformity of spray heads.
- The grid head count, the quarter/half/full split, the actual spacing after fitting, the irregular-lawn estimate (area ÷ (S × L) + perimeter ÷ 2S + 1) and the metric wind bands are derived on this page.
Links checked November 15, 2026. Wind percentages were checked against the Toro specification sheet; metric wind bands are the mph bands converted and rounded.