Irrigation Pipe Size Calculator
Get the smallest standard pipe size that carries your flow within the velocity limit, answered as a nominal size in the pipe you’re buying (Sch 40, Class 200 or 160 PVC, PE or copper). For long runs, add the length and the pressure you can afford to lose; every size is shown with its velocity and loss.
Pipe size calculator
How the calculator works
Pipe that is too small makes water rush, which wastes pressure and risks water hammer. This tool finds the smallest standard size that keeps water at or under your velocity limit, and for long runs, within the pressure you can afford to lose.
- VelocityV (ft/s) = 0.4085 × GPM ÷ d² (d = inside diameter, inches)
- Minimum IDdmin = √(0.4085 × GPM ÷ Vmax)
- Velocity modethe first size in your class with an inside diameter of at least dmin
- Long-run modethe first size with V ≤ Vmax and Hazen-Williams loss × length ÷ 100 ≤ allowable loss
- Capacitymaximum GPM per size = Vmax × d² ÷ 0.4085
Metric users get the DN equivalent of each size. For PN-rated metric pipe, enter its inside diameter in the friction loss calculator.
Worked examples
A residential main
- InputsSch 40 PVC, 12 GPM, 5 ft/s.
- ResultMinimum ID 0.990 in → 1 in (ID 1.049) at 4.45 ft/s. 3/4 in would run at 7.07 ft/s.
A rotor lateral at the valve
- InputsClass 200 PVC, 25 GPM, 5 ft/s.
- ResultMinimum ID 1.429 in → 1-1/4 in (ID 1.502) at 4.53 ft/s.
A long main
- InputsSch 40, 12 GPM, 300 ft, 3 psi allowed.
- Result1 in passes velocity but would lose about 10 psi. 1-1/4 in loses 2.66 psi at 2.57 ft/s: pressure loss governs.
A farm main
- InputsClass 160, 100 GPM, 1,000 ft, 5 psi allowed.
- Result4 in (ID 4.154) at 2.37 ft/s, losing 2.11 psi; 3 in would lose over 8 psi.
GPM by pipe size at 5 ft/s
| Nominal size | Sch 40 PVC / PE | Class 200 PVC |
|---|---|---|
| 1/2 in | 4.7 GPM | — |
| 3/4 in | 8.3 GPM | 10.6 GPM |
| 1 in | 13.5 GPM | 17.3 GPM |
| 1-1/4 in | 23.3 GPM | 27.6 GPM |
| 1-1/2 in | 31.7 GPM | 36.2 GPM |
| 2 in | 52.3 GPM | 56.5 GPM |
| 2-1/2 in | 74.6 GPM | 82.8 GPM |
| 3 in | 115.2 GPM | 122.8 GPM |
| 4 in | 198.4 GPM | 202.9 GPM |
The calculator builds the same chart for your class and limit under the result.
Sizing for long runs
On a short run, velocity decides. On a long one, friction adds up, and a size that passes the velocity test can still lose too much pressure. Decide how much you can spend on the main (often 3–5 psi on a home system), enter the length, and the calculator steps up until both limits pass. For laterals, aim for 10–20 % of the heads’ pressure. See the actual loss of any size in the friction loss calculator, and check what is left at the heads with the irrigation pressure calculator.
Mainlines and laterals
Size the mainline for the largest zone that runs, using its total flow; find that with the sprinkler zone calculator. Laterals carry less flow past each head, so they can step down a size toward the end. Upstream, the meter and service line limit what reaches the main; the available flow calculator checks them.
Mistakes to avoid
Sizing by nominal diameter
Class 200 1-in pipe is wider inside than Sch 40 1-in. Always size in the class you’ll buy.
Ignoring run length
A 300 ft main at the velocity limit can lose 10 psi. Use the long-run tab.
Raising the velocity limit
Above 7.5 ft/s is beyond common practice for plastic pipe.
Oversizing
Under 2 ft/s, the pipe is bigger than needed and dirt may settle. One size down may work.
How we build and check this calculator
Every rule on this page names its source, and the code is tested against worked cases before every update.
- Methods from recognised sources. The velocity rule follows Texas A&M Extension; friction follows extension and manufacturer charts. See the sources.
- Tested against worked cases. Six cases run against the calculator code before every update: a residential main, a Class 200 lateral, a long main, a farm main, a metric flow and a flow too big for 4-in pipe. All must match.
- Honest about limits. Above 4 in, or for pumped farm systems, have the design checked by a professional.
- Your entries stay on your device. The calculator runs in your browser. Nothing you type is sent anywhere; your inputs live only in the page address, so you can bookmark or share a result.
- Corrections are welcome. If a number looks wrong, tell us. We check it against the sources, fix the page and update the date at the top.
Page history
- Published. Methods, test cases and source links checked.
Questions
What size pipe do I need for my sprinkler system?
Size by the largest zone flow. With the common 5 ft/s limit, 1-in Sch 40 PVC carries up to about 13.5 GPM, 1-1/4 in about 23 GPM and 1-1/2 in about 32 GPM. Long runs may need one size larger to keep pressure loss down.
Mainline vs lateral, do they need different sizes?
The mainline carries the largest zone’s full flow all the time it runs, so size it for velocity and loss. Laterals lose flow at each head, so the pipe can step down toward the end; check them with the friction loss calculator’s lateral tab.
What is the 5 ft/s rule?
Water in PVC should move no faster than about 5 ft/s. Faster water raises friction steeply and makes water hammer (pressure surges when valves close) that can crack pipe and fittings. Many experts say never exceed 10 ft/s.
How many GPM can 3/4, 1 and 1-1/4 inch pipe carry?
At 5 ft/s in Sch 40 PVC, about 8.3 GPM for 3/4 in, 13.5 GPM for 1 in and 23.3 GPM for 1-1/4 in. Class 200 has a wider bore and carries more, 10.6, 17.3 and 27.6 GPM.
Why does poly pipe often need one size up?
Controlled-ID PE has the same bore as Sch 40 but a rougher wall (C 140 against 150), so it loses more pressure at the same flow. On long runs that can push it over the allowable loss.
Bigger pipe or more pumping?
Bigger pipe costs more up front but loses less pressure, so a pump uses less energy every hour it runs. On long mains and pumped systems one size up often pays back.
Sources
- Texas A&M AgriLife Extension (Fipps), Calculating Horsepower Requirements and Sizing Irrigation Supply Pipelines (EB-6011). The 5 ft/s rule for PVC, never above 10 ft/s, velocity from flow and inside diameter, and maximum flows by pipe size.
- University of Florida IFAS Extension, Hydraulic Considerations for Citrus Microirrigation Systems (CH156). Hazen-Williams friction loss for irrigation pipe.
- Hunter Industries, Handbook of Technical Irrigation Information. Friction loss and velocity charts for Sch 40 and Class 200 PVC.
- The Toro Company (ToroAg), Hazen-Williams Equation. C values for PVC, copper and other pipe.
- The minimum inside diameter √(0.4085 Q ÷ V), the maximum flow per size and the shared pipe inside diameters (ASTM D1785 and the D2241 minimum-wall rule) are derived on this page; friction follows the friction loss calculator.
Links checked November 15, 2026. The velocity constant 0.4085 equals 1 ÷ 2.45, the form used in the Texas A&M bulletin.