Irrigation Water Cost Calculator

Find what your irrigation water costs per month and per year. Use your own rates — per 1,000 gallons, per CCF or per cubic metre — with or without sewer charges, see how tiered rates make irrigation water dearer than indoor water, and work out savings and payback for a smart controller or drip conversion.

Water cost calculator

Your rate
Quick picks

1Water used

gal

From the water use calculator or your meter.

months

2Your rates

As printed on your water bill.

Example value — enter your local rate.

Leave 0 if sewer isn’t billed on water use.

How the calculator works

Your bill prices water by a unit — 1,000 gallons, a CCF or a cubic metre. Turn your irrigation gallons into those units and multiply by your rate.

  • Billing unitsper 1,000 gal: gal ÷ 1,000 · per CCF: gal ÷ 748.05 · per m³: gal ÷ 264.17
  • Flat ratecost = units × (water rate + sewer rate if it applies)
  • Tiered rateirrigation cost = bill(indoor + irrigation) − bill(indoor)
  • Average irrigation rateirrigation cost ÷ irrigation units
  • Savings(current − new use) in units × rate; payback = upgrade cost ÷ monthly saving
  • Yearmonthly cost × months you irrigate

Don’t know your gallons? The water use calculator works them out from your zones, area or meter.

Worked examples

One watering with sewer

  1. Inputs3,115 gal; water $4 + sewer $10 per 1,000 gal (example rates).
  2. Result3.115 × $14 = $43.61.

A season on a flat rate

  1. Inputs12,460 gal a month at $3 per 1,000; no sewer; 6 months.
  2. Result$37.38 a month; $224.28 a year.

Billed per CCF

  1. Inputs6,788 gal; water $11.17 + sewer $6.33 per CCF.
  2. Result6,788 ÷ 748.05 = 9.074 CCF × $17.50 = $158.80. Rounding the rate to a cost per gallon first would give about $159.52.

Four tiers

  1. InputsIndoor 5,000 gal; irrigation 14,000 gal; tiers to 6,000 at $3.00, to 15,000 at $4.50, to 30,000 at $6.50, above at $9.00 (example tiers).
  2. ResultBill $84.50 with irrigation, $15.00 without: irrigation costs $69.50, an average of $4.96 per 1,000 gal — well above the $3.00 first tier.

In metric, 30 m³ at €2.10 per m³ costs €63.00.

Tiered rates explained

The four-tier example: where each gallon lands.
TierRangeRateGallons used hereCost
10–6,000 gal$3.006,000$18.00
26,000–15,000$4.509,000$40.50
315,000–30,000$6.504,000$26.00
4above 30,000$9.000$0.00

Indoor water takes the first 5,000 gallons of tier 1. Irrigation gets only the last 1,000 cheap gallons, then pays tier 2 and 3 prices. Each extra 1,000 gallons now costs $6.50. Cutting run times with the run time calculator saves at that top rate first.

Sewer and irrigation meters

Sprinkler water doesn’t go down the drain, but many utilities still charge sewer on all metered water. Some use your winter average for sewer, and some let you fit a separate irrigation meter. If yours does either, set “Sewer charged on irrigation water?” to No. A separate meter has its own cost; compare it with the sewer you’d save. A watering budget based on your landscape’s allowance is in the landscape water budget calculator.

Savings and payback

A 35 % cut on 20,000 gallons a month at $5.00 per 1,000 gallons saves $35.00 a month, $210 over six months, and pays back a $250 controller in about 7.1 irrigation months. Use a reduction you trust — your own meter before and after is best. To price an upgrade or a new system, see the sprinkler system cost calculator.

Mistakes to avoid

Using the bill’s average rate

On tiered rates, irrigation water costs more than the average. Use the tiered tab.

Mixing billing units

A CCF is 748 gallons, not 100 or 1,000. Pick the unit printed on your bill.

Counting fixed charges

Service charges don’t change when you water. Leave them out.

Trusting a product’s savings claim

Savings depend on how you watered before. Measure, then enter your own figure.

How we build and check this calculator

The arithmetic is shown under every result, and the code is tested against worked cases before every update.

  • Your rates, not ours. No rate on this page comes from any utility; example values are labelled. Volume conversions follow K-State Extension. See the sources.
  • Tested against worked cases. Seven cases run against the calculator code before every update: one watering with sewer, a season, a CCF bill, four tiers, savings and payback, a metric bill and tiers entered out of order. All must match.
  • Honest about limits. Some utilities have seasonal or drought surcharges; add them to your rate.
  • Your entries stay on your device. The calculator runs in your browser. Nothing you type is sent anywhere; your inputs live only in the page address, so you can bookmark or share a result.
  • Corrections are welcome. If a number looks wrong, tell us. We check it, fix the page and update the date at the top.

Page history

Published. Methods, test cases and source links checked.

Questions

How much does it cost to water a lawn?

Gallons used, divided by the billing unit, times your rate. One inch on a 5,000 ft² lawn (about 3,115 gallons) costs $43.61 at $4 water plus $10 sewer per 1,000 gallons, but only $12.46 if sewer isn’t charged on it. Your bill’s rates decide it.

How do tiered water rates work?

The price per unit rises as you use more in a billing period. Indoor use fills the cheap first tier, so irrigation water lands in the higher tiers and costs more per gallon than the bill’s average suggests.

Does sewer apply to sprinkler water?

It depends on the utility. Some charge sewer on all metered water, some cap it at your winter average, and some offer a separate irrigation meter with no sewer charge. Your bill or utility will say.

What is a CCF?

One hundred cubic feet of water, which is 748 gallons. Many US utilities bill in CCF (also written HCF).

Is a smart controller worth it?

EPA says replacing a clock timer with a WaterSense labeled controller can save an average home up to 15,000 gallons a year. Enter your own expected reduction and the controller’s price in the savings tab to see your payback.

Why aren’t fixed charges included?

Base or service charges are the same whether you water or not, so they don’t belong to the cost of irrigation. The bill-with and bill-without figures here are the usage part only.

Sources

  1. U.S. Environmental Protection Agency, WaterSense, Irrigation Controllers. Replacing a clock-based controller with a WaterSense labeled controller can save an average home up to 15,000 gallons a year.
  2. Kansas State University Research and Extension, Irrigation Formulas and Conversions (MF-2404). Volume conversions (7.48 gallons per cubic foot) behind the CCF and cubic-metre billing units.
  3. The billing-unit factors (CCF = 100 ft³ × 7.48052 = 748.05 gal; m³ = 264.17 gal), the tier arithmetic and payback are derived on this page. All rates are entered by you; none comes from any utility or website.

Links checked November 15, 2026. Example rates on the page are labelled as examples.