Irrigation Water Use Calculator

Work out how much water your irrigation uses. Enter each zone’s flow and schedule, the area and depth you apply, or two readings from your water meter, and get gallons (or litres) per watering, week, month and season.

Water use calculator

Work it out from
Quick picks

1Your zones

GPM

From the zone calculator, your flow meter or the nozzle chart.

min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min
GPM
min

2Season

weeks
gal

From the water requirement calculator, to compare.

See your water use ↓

How the calculator works

There are three ways to find out how much water your sprinklers use. Pick the one that matches what you know.

  • Zone run timesgal a week = Σ (zone GPM × minutes × cycles a week)
  • Area and depthgal a week = ft² × inches × 0.6234 ÷ efficiency; acres: acre-inches × 27,154
  • Meter readingsgal = (end − start) × unit factor; per day = gal ÷ days; week = day × 7
  • Monthweek × 52 ÷ 12 (zones and area) or day × 365 ÷ 12 (meter)
  • Seasonweek × season weeks
  • Metric1 mm on 1 m² = 1 litre; L/min × minutes = litres

Don’t know a zone’s flow? The sprinkler zone calculator adds up the heads, or time a bucket at the tap with the available flow calculator.

Worked examples

Four turf zones

  1. Inputs4 zones at 12 GPM, 20 minutes, 4 cycles a week, 26-week season.
  2. Result960 gal per cycle; 3,840 gal a week; 16,640 gal a month; 99,840 gal a season.

Sprays, a rotor zone and drip

  1. InputsTwo spray zones at 9.5 GPM for 12 min × 3; rotors at 14 GPM for 35 min × 2; drip at 1.5 GPM for 45 min × 3; 30 weeks.
  2. ResultAbout 786 gal per cycle; 1,867 gal a week (1,866.5); 8,088 gal a month; 55,995 gal a season.

A lawn by area

  1. Inputs5,000 ft², 1 in a week, 75 % efficiency, 26 weeks.
  2. Result3,117 gal reach the grass; 4,156 gal a week applied; 108,052 gal a season.

From the meter

  1. Inputs1,234.5 → 1,268.9 CCF over 30 days on an irrigation meter.
  2. Result34.4 CCF = 25,733 gal; 857.8 gal a day; 6,004 gal a week; 26,090 gal a month.

In metric, 25 mm a week on 150 m² is 3,750 litres a week.

Typical zone use

Gallons per cycle at common run times. Your zone flow comes from the heads on it.
ZoneTypical flowRun timePer cycle
6 spray heads9 GPM15 min135 gal
4 rotors12 GPM30 min360 gal
Rotary nozzles6 GPM35 min210 gal
Drip bed2 GPM45 min90 gal

Run times come from the run time calculator; what the plants actually need comes from the water requirement calculator. Enter that weekly need to see if you’re watering more than you have to.

Reading your water meter

Meter and bill units.
UnitGallonsLitres
1 cubic foot (ft³)7.4828.3
1 CCF (100 ft³)748.052,831.7
1 cubic metre (m³)264.171,000
1 acre-inch27,154102,790

On a whole-house meter, choose “whole house” and enter your indoor use per day; a winter bill divided by its days is a good estimate. To see what this water costs, take the monthly figure to the water cost calculator.

Why a month is 4.33 weeks

A year has 52 weeks and 12 months, so an average month is 52 ÷ 12 = 4.33 weeks. Multiplying weekly use by 4 understates a month by about 8 %. In the first example, the ×4 shortcut gives 15,360 gal; the true monthly average is 16,640 gal. For a code-based yearly allowance, see the landscape water budget calculator.

Mistakes to avoid

One flow for every zone

Rotor and drip zones flow very differently from sprays. Give each zone its own flow.

Forgetting cycle-and-soak

If a zone runs three short starts a day, that’s three cycles. Count them all.

Net vs gross

The depth plants need is net. Sprinklers must put on more to cover losses; add the efficiency.

Mixing meter units

A bill in CCF with a meter in gallons is common. Use the meter’s own unit for the readings.

How we build and check this calculator

Every formula on this page is shown, and the code is tested against worked cases before every update.

  • Methods from recognised sources. Volume conversions follow K-State Extension’s formula sheet. See the sources.
  • Tested against worked cases. Six cases run against the calculator code before every update: four turf zones, a mixed system, a lawn by area, a meter in CCF, a metric lawn and a bad meter reading. All must match.
  • Honest about limits. Schedules change through the season. Meter readings show what really happened.
  • Your entries stay on your device. The calculator runs in your browser. Nothing you type is sent anywhere; your inputs live only in the page address, so you can bookmark or share a result.
  • Corrections are welcome. If a number looks wrong, tell us. We check it against the sources, fix the page and update the date at the top.

Page history

Published. Methods, test cases and source links checked.

Questions

How many gallons does a sprinkler zone use?

Zone flow in GPM times the minutes it runs. A spray zone of 6 heads at 1.5 GPM each (9 GPM) running 15 minutes uses 135 gallons each time. Rotor zones run longer at a similar flow, so they often use more per cycle.

How many gallons is an inch of water on a lawn?

About 0.62 gallons for every square foot, so an inch on a 5,000 ft² lawn is about 3,117 gallons before losses. On an acre it is 27,154 gallons, which is one acre-inch.

How do I read my water meter, gallons or CCF?

Look at the units printed on the dial. Many US meters read in gallons or cubic feet; bills often use CCF, which is 100 cubic feet or 748 gallons. Take one reading, wait a set number of days, take another and enter both.

Why is my water bill higher than expected?

Summer irrigation is the usual reason, but leaks are common too. With all water off, watch the meter; if it still moves, there is a leak. A broken sprinkler head can waste hundreds of gallons in one cycle.

Should I get a separate irrigation meter?

Some utilities offer one, and it can save money where sewer charges are based on all metered water. It also makes this calculation simple because the meter only counts irrigation. Ask your utility.

What is an acre-inch?

The water that covers one acre one inch deep, 27,154 gallons. Farms often measure water this way. Use the area method with acres to see your season in acre-inches.

Sources

  1. Kansas State University Research and Extension, Irrigation Formulas and Conversions (MF-2404). Water volume conversions used here, including 27,154 gallons per acre-inch and 7.48 gallons per cubic foot.
  2. U.S. Environmental Protection Agency, WaterSense, Irrigation Controllers. Residential outdoor water use in the US (nearly 8 billion gallons a day, mainly irrigation) and how scheduling affects it.
  3. The per-zone method, month length (52 ÷ 12 weeks), 0.6234 gallons per square foot per inch (144 in³ ÷ 231 in³) and the meter unit factors (CCF = 748.05 gal; m³ = 264.17 gal) are derived on this page.

Links checked November 15, 2026. Some handouts multiply weekly use by 4 for a month; months average 4.33 weeks, so that method reads about 8 % low.